Used to deposit thin films.
The device with digital micromirrors is designed for light amplitude modulation.
The digital microscope is designed for the study of small objects. It has a magnification of 10-100 times and a 5-megapixel camera.
Designed for measuring and controlling various signals in the frequency range of up to 200 MHz.
Designed for recording spectra from powders and liquids in the infrared range.
The laser provides a single-frequency green (532 nm) radiation with a power of 5 W. It is used in optical computing, optical imaging, and research related to light-environment interactions.
芦DM6 M禄 沾斋寨謤崭战寨崭蘸炸 铡占铡栈铡栅榨沾 蘸铡湛寨榨謤铡站崭謤沾铡斩 瞻铡沾铡寨铡謤眨 乍, 崭謤炸 斩铡窄铡湛榨战站铡债 乍 斩盏崭謧诈榨謤斋 窄崭謤謩铡盏斋斩 站榨謤宅崭謧债崭謧诈盏崭謧斩斩榨謤斋 謬 瞻榨湛铡咋崭湛崭謧诈盏崭謧斩斩榨謤斋 瞻铡沾铡謤: 员盏斩 铡占铡栈铡謤寨崭謧沾 乍 謪蘸湛斋寨铡寨铡斩 眨榨謤铡咋铡斩謥 寨铡湛铡謤崭詹铡寨铡斩崭謧诈盏崭謧斩 謬 闸铡咋沾铡寨崭詹沾铡斩斋崭謧诈盏崭謧斩, 斋斩展炸 诈崭謧盏宅 乍 湛铡宅斋战 寨斋謤铡占榨宅 铡盏斩 湛铡謤闸榨謤 崭宅崭謤湛斩榨謤崭謧沾: 曰斩湛崭謧斋湛斋站 债謤铡眨謤铡寨铡咋沾炸, 闸铡謤毡謤 宅崭謧债沾铡斩 蘸铡湛寨榨謤炸 謬 瞻铡謤沾铡謤榨謥站铡债 寨崭斩謫斋眨崭謧謤铡謥斋铡斩榨謤炸 栅铡謤毡斩崭謧沾 榨斩 芦DM6 M禄 沾斋寨謤崭战寨崭蘸炸 瞻斋铡斩铡宅斋 眨崭謤债斋謩 粘辗眨謤斋湛 崭謧战崭謧沾斩铡战斋謤崭謧诈盏崭謧斩斩榨謤斋 謬 斩沾崭謧辗斩榨謤斋 闸斩崭謧诈铡眨謤沾铡斩 瞻铡沾铡謤諠 闸铡謤榨宅铡站榨宅崭站 铡謤湛铡栅謤崭詹铡寨铡斩崭謧诈盏崭謧斩炸 謬 铡謤栅盏崭謧斩謩斩榨謤炸 湛铡謤闸榨謤 眨斋湛铡寨铡斩 崭宅崭謤湛斩榨謤崭謧沾:
The device is used to measure laser power in optical systems.
A liquid crystal spatial light modulator is used to modulate the phase or amplitude of light.
The device that generates electric signals is used to study the effect of an electric field on the environment. For example, it can be used to study the effect of an alternating electric field on a liquid crystal.
The laser operates in continuous mode and has a power of 105 mW and a wavelength of 532 nm. It is intended for the study of various optical objects under the influence of laser radiation.
The laser operates in continuous mode and has a power of 30 mW and a wavelength of 532 nm. It is intended for the study of various optical objects under the influence of laser radiation.
The laser is single-mode, operates in continuous mode, and has a power of 3 W and a wavelength of 532 nm. It is intended for the study of various optical objects under the influence of laser radiation.
The device is a semiconductor materials research system that allows obtaining data in the form of various characteristics (I鈥揤, etc.).
The equipment is equipped with a system for capacitance measurements (C-V). Measurements are performed in the nanofarad range in the frequency range of 10 kHz-10 MHz.
Designed to obtain gold contacts. It has two operating modes: manual and semi-automatic. It can obtain a contact with a continuation of its gold wire and a spherical contact to create a circuit at the next point.
A high-precision mechanical contact thickness gauge that can be used to measure the thickness of films, paper, corrugated cardboard, textiles, non-woven fabrics, and dense insulating materials. The automatic sampler is designed to measure the thickness of several consecutive points.
The power meter is used to measure the average power of a laser beam up to 2 W.
The power meter is used to measure the average power of a laser beam up to 2 W.
The power meter is used to measure the average power of a laser beam up to 3 W.
The power meter is designed to measure the power of lasers and light sources using testers.